Power Grid Monitoring

The INCON® Optimizer3 Circuit Breaker Monitor delivers advanced automated reporting of all critical circuit breaker diagnostics to ensure uptime and facilitate predictive maintenance. The Optimizer3 is ideal for high-voltage, live or dead-tank, oil, vacuum or gas circuit breakers.

The 1250-LTC is designed specifically for transformer LTC position monitoring. Its hardware is the same as the 1250B with the addition of Input Isolation, Serial Port and Relay inputs which provide enhanced analysis of LTC position.

The 1250B is a versatile programmable position monitor. Its main application is for Transformer LTC position monitoring, but its non-linear conversion table gives it the ability to convert non-linear rotary motion into a linear scale for additional applications.

The 1511-LTC provides basic LTC tap position monitoring using the LTC’s slide wire position feedback device. As the LTC changes taps, the moveable contact picks up the voltage divided through the resistors in the slide wire, so that each tap has its own specific voltage.

LineIQ provides basic line fault indication, as well as intelligent remote monitoring. Basic fault indicators point only to the initial (primary) faults; however, intelligent monitoring helps utilities more quickly isolate faults and restore power through recording real-time data on true voltage, fault waveform, load profile, line status and condition, ambient and conductor temperature, and through providing time-stamped event recordings.