Celltron Ultra
ENERGIZING CLIENTS SINCE 1991
CELLTRON ULTRA FEATURES
CRITICAL POWER CONFIDENCE
- Utilize pre-loaded data on 12 battery manufacturers to expedite testing and record-keeping
- Software and data management techniques allow user to establish battery reference values when data is not available, for reference-free testing
- Stores over 250 pre-established reference/benchmark values to assist in the development of battery pass/fail thresholds
- Enhanced conductance methodology enables accurate and repeatable testing in the presence of ultra-high electrical interference
- Versatile multi-meter features allow for the measurement of AC and DC voltage and current. Scope function displays AC ripple current and more
- Includes two rechargeable battery packs- each providing power for more than 1000 full test sequences, or more than 16 hours of test time
- The industry’s first lighted probes increase visibility in tight battery cabinets, enhancing safety and efficiency while reducing risk of equipment damage
- 32 megabyte card stores data up to 500 locations or systems
KIT CONFIGURATION
CELLTRON ADVANTAGE CTU-6000 KIT
Complete kit provides everything needed for performing battery maintenance, including:
- Test probes and extenders
- Test clamps
- Temperature sensor
- PC software (NEW CT-EXPRESS)
- Portable printer
- 2 rechargeable battery packs
ACCESSORIES
C040
PDF40 Digital Amp Clamp / Meter
CA087
Thermal IR / RS232 Printer
A090
Power Adapter / Charger for Thermal IR Printer
A095
6 Pack of Thermal Printer Paper for the CA087 Printer
C024
8 Foot Long Duraclamps for 6 and 12 Volt Batteries Only
C092
4 Foot Long Duraclamps
C062
4 Foot Long Industrial Clamps with Reinforced Cables
A094
Hard Carrying Case for the Celltron ULTRA Battery Tester and its Accessories
C025
8 Foot Long Duraprobes for 6 & 12 Volt Batteries Only
C093
4 Foot Long Duraprobes
C031
Replaceable Duraprobe Waffle Tips
C069
Duraprobe Replacement Tips Kit
C034
30 Inch Lighted Probe Extenders
C033
Replaceable Optic Lamp Kit for Probe Extenders
C049
IR Receiver for Data Transmission
C058
Infrared Laser Thermometer
C090
NiMH Rechargeable Battery Pack
C091
NiMH Battery Pack Charger
C089
2GB SD Memory Card
C095
SD Card Reader
SPECIFICATIONS
MODEL
Specifications
Model Numbers:
CTU-6000 KIT
Warranty:
Franklin Electric standard one-year warranty
Applications:
UPS system testing; Power utility switching and other applications; telecommunications power systems
Conductance Range:
100-19,900 Mhos/Siemens
Battery Capacity Range:
10 Ah to 6000 Ah approx.
Power Requirements:
9.6 Volt, 1600 mAHNiMH internal swappable battery (included) provides more than 1000 test operations before re-charge
Voltage Range:
1.5-20.0 Volts DC
Display:
LCD-FSTN, 128 X 64 pixel graphical display with green LED backlight
Operating Temperature:
1 to 40 degree C, 95% relative humidity
Interface Operations:
Kit includes Kelvin probes, clamps and lighted probe extender grips. Custom interfaces available. Professional grade cable connector
Housing Material:
Acid resistant ABS plastic with sure-grip santoprene overmold
Product Dimensions:
12 in. X 4 in. X 3 in. (280 mm X 105 mm X 80 mm)
Product Weight:
2.6 lb (1 .1 kilo)
Over Voltage Protection:
Fused protection to 600 volts DC
Test Data Storage:
500 strings of 480 tests
Temperature Compensation:
Automatic adjustments on temp input
Calibration:
Franklin Electric will work with each customer to establish a regular calibration program if it is required by their quality or other management system
Connectorized Test
Cable Options:
• Dual contact clamps
• Dual contact probes
• Custom cables by quotation
Power Requirements:
9.6V, 1600mAH, NiMH
Internal swappable battery &
charger
Display:
LCD – FSTN
2.619 in x 1.309 in, 128 x 64 pixels, 40 degree viewing angle, contrast ratio 8, Green LED backlight
Keypad:
Stainless-steel dome, polycarbonate overlay, 1,000,000 actuations
Data Transfer:
Infra-red HP protocol, Infra-red, half-duplex IRDA protocol, RS-232
printer, Secure digital card
Environmental Operating Range:
0 to +40°C, 95% relative humidity,
non-condensing
Storage Temperature:
-20 to 50°C
Over Voltage Protection:
• Auto-reset disconnect
• Reverse polarity protected
Housing Material:
Acid resistant ABS plastic santoprene overmold
Analyzer Dimensions:
11 in x 4 in x 3 in
280 mm x 105 mm x 80 mm
Case Dimensions:
19 in x 15.5 in x 7 in
485 mm x 395 mm x 180 mm
Analyzer Weight:
2.6 lb
CTU-6000 Test Kit
Shipping Weight:
Approximately 11 lb
